MaoxingEnterprise MX17G Thermoforming Machine with robot
Product Description
MX17G Thermoforming Machine with robot is a fully automatic thermoforming machine so far.
MX17G Thermoforming Machine ROBOT STACKING UNIT WITH CONVEYOR is designed for carring cups automatic by robot instead of blowing out by air.
The speed about 21 moulds per minute.
| 1、 Power | 380V/3P/50Hz |
| 2、 Sheet material | PP、PE、PS、PET、PVC etc. |
| 3、 Sheet thickness | 0.2-2.5mm |
| 4、 Sheet width | ≤660 adjustable |
| 5、 Drive system | Full servo motor drive. motion mode control, touch screen operation |
| 6、 Forming speed | ≤30times/min, with robot 25/min |
| 7、 Forming area | 680*450mm adjustable |
| 8、 Moulding deapth | ≤220mm |
| 9、 Mould table size | 750*500 5pillars |
| 10、Air source | 0.5-0.8Mpa |
| 11、Water consumption | ≤0.5m³ |
| 12、Machine size | 9000×2500×3500mm |
| 13、Shee sending servo motor | 5KW |
| 14、Up moulding servo motor | 22KW |
| 15、Down moulding servo motor | 18KW |
| 16、Stretching servo motor | 14KW |
| 17、Temperature controller | Omoron temperature module |
| 18、Total power | About 240KW finla exhaust about 65kw |
| 19、Machine total weight | 8.5T |